Posted on Mon 16th May, 2016 - hotnigerianjobs.com --- (0 comments)
Amaiden Energy Nigeria Limited is committed to the provision of services of Technical Inspection, Expediting, Quality Assurance and Control, Training, Procurement and Outsourcing of Technical Personnel in line with global best practices in order to meet and exceed our customers’ expectations.
The UFR Offshore FJC supervisor is responsible for all Offshore FJC activities during his shift and is directly accountable for the correct application and quality of the field joints.
Installation Activities
As the specialist in Coating and Field joint coating process, on board the UFR CTR flowlines laying vessel the Coating Interpretor shall:
Make sure that applicable coating and FJC documentations are approved and accessible on board,
Make sure that all Raw Materials certificates are in line with project specifications requirements and available in case of needed
Make sure that all Raw Materials are stored and monitored as per approved project specifications
Make sure that factory parent coating cut back areas are well prepared and fit-up are acceptable as per specifications.
Make sure that Raw materials and equipments used for FJC process are same or similar to the one used for the qualification process.
Ensure that all factory pipelines coatings and previous FJC coatings are well inspected by contractor and all coating damages are repaired prior pipelines installations.
Supervise all FJC processing and make sure it is done according to good workmanship and in safety manner.
See all the FJC done during his shift, make his own interpretation of the results and agree with contractor representative about the status to be given on the joint. In the absence of TPA onboard the vessel, the FJC Supervisor will act as the highest technical authority on board to validate FJC interpretation.
Inform the company Main Representative about all shortcomings, problems and/or major defects detected in the fabrication.
Ensure that the traceability of FJC results is well maintained onboard through appropriate QC records. Collect the inspection reports carried out during its shift and file them properly on board available for the CY main representative.
During the mobilization phase, he/she shall be able to judge the capability and skillfulness of applicators in order to support the following:
Inspection and expertise of any Coating repair on Factory coating and previous FJC carried out as per specifications.
Evaluation of the specific coating damage to be repaired on board if they are not specified in the FJC documents.
Assessment of applicators
Collection of applicators certificates
Follow-up of applicators
HSE:
Safety is the core value of the Total Group and shall be the first and foremost priority for all company offshore personnel.
The UFR Offshore FJC Supervisor shall demonstrate exemplary HSE behavior and ensure that all acts under his supervision are conducted in a safe manner according to the Company Golden Rules, contractor HSE rules and all international and local regulations.
In particular the UFR Offshore FJC Supervisor shall:
Report safety improvements, anomalies and incidents according the HSE management system on board the vessel
Stop immediately all unsafe acts by company, contractor or third party personnel
Be a safety leader for all contractor and subcontractor staff in his domain of supervision
Not engage in any unsafe acts
Job Requirements
Post-graduate, Technician in polymers materials
FROSIO qualification at least level III – preferably – or NACE level III peer review
Fully conversant with ISO, ASTM and others international Standards
Having a solid experience in Coating and FJC process especially for the wet insulation coating 5LPP, IMPU processes.