NDT Technician (Phased Array Ultrasonic Testing) at Associates Consulting Limited

Associates Consulting Limited - Our client is a fast-growing indigenous upstream, midstream, and downstream oil and gas group with interests in oil and gas exploration and production, gas processing, petrochemical/fertilizer production, and power.

They are currently expanding with some pipeline projects around the country, and they are recruiting to fill this role below:

Job Title: NDT Technician (Phased Array Ultrasonic Testing)

Location: South-South, Nigeria
Employment Type: Full-time
Reports to: Construction Manager

Key Responsibilities 

• Preparation of a Non-Destructive Test plan with reference to construction activities.
• Prepare and verify that tests, controls, and Inspections are carried out according to the Quality control plan, Inspection Test plan and Mechanical completion approval.
• Ensure appropriate NDT standards, procedures and specifications are in place during the NDT execution activities.
• Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.
• Carry out work in accordance with the Company's Health, Safety, Environmental and Quality Systems.
• Perform the assigned tasks with due diligence regarding the Integrated Management Systems of the Company.
• General familiarity across other NDT methods; Where applicable assume technical responsibility for facility NDT staff; Establish, review for editorial and technical correctness and validate NDT instructions and procedures; designate the particular test methods, techniques and procedures to be used within the scope and limitations of any certification held; carry out tasks at all levels; and Provide supervision and guidance for NDT personnel at all levels.
• Non-Essential: Safety: Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment.
• Has sufficient practical knowledge of applicable materials, fabrication, process, and product technology to select NDT methods, establish NDT techniques, and assist in establishing acceptance criteria where otherwise are not available.
• Carry out and supervise all tasks at or below Level II and Report the results of non-destructive tests. Level III An individual certified to Level III has demonstrated competence to perform direct NDT operations for which certified. The Level III shall be competent with the following: Evaluate and interpret results in terms of existing standards, codes and specifications.
• Within the scope of the competence defined on the certificate. Level II shall be competent in: select the NDT technique for the test method to be used; define the limitations of application of the testing method; translate NDT code, standards, specifications and procedures into NDT instructions adapted to the actual working conditions; Set up and verify equipment settings; Perform and supervise tests; Interpret and evaluate results according to applicable standards, codes specifications or procedures; Prepare written instructions.
• Within the scope of the competence defined on the certificate, Level I personnel may perform the following with NDT instructions: Set up NDT equipment; Perform/conduct the tests; Record and classify the results of the tests according to written criteria; and populate a report under supervision. Level II: An individual certified to Level II has demonstrated competence to perform NDT according to NDT procedures.
• An individual certified to Level I has demonstrated competence to carry out NDT according to written instructions and under the supervision of Level II or Level III personnel.
• The technician will typically complete NDT inspection works at the Pipeline Project’s site. Remote site inspections are undertaken at onshore/offshore facilities.
• The NDT Technician is responsible for using a range of analysis techniques used in the Inspection Industry to evaluate the properties of a material, component or system without causing damage.
• Review NDT test reports and Radiography films prior to share with QC personal for any issue/defect.
• Initiate non-destructive testing (NDT) requests and monitor and review examination results to determine defects, corrosion, or blockages and make recommendations for repairs or replacement as required.

Skill-set

• Diploma in Engineering with a minimum 7 years of hands-on experience.
• Must be certified and experienced in Advanced NDT (Phased Array Ultrasonic Testing – PAUT).
• In-depth knowledge of International Specification, Such as ASM B31.3, ASME B16.5, API 650 etc.
• In addition to the bullet points listed in functions, the NDT Technicians should have knowledge of: The various NDT techniques available, how, when and why to use each technique; Writing of worksheets and reports; Safety standards/HSEQ/Step back 5 x5 and JSEA; and NATA Requirements. Desired Knowledge, Skills, Abilities, and Other Characteristics.
• NDT Level-II in Radiography / DPT / MPT and UT technique.
• Should be well versed with NDT techniques and awareness about codes, standards, safety and environment standards.

Application Closing Date
17th December, 2024.

Method of Application
Interested and qualified candidates should send their CV to: [email protected] using "NDT Technician" as the subject of the mail.